--- title: Quick Installation Guide description: How to install 7kW Smart Home Series Charge Point --- [Skip to content](https://support.enplus.uk/migration/knowledge/quick-installation-guide#main-content) English Show submenu for translations [Contact us](https://support.enplus.uk/migration/knowledge/kb-tickets/new?hsLang=en) [Customer portal](https://support.enplus.uk/tickets-view?hsLang=en) ![enplus grey logo-1.svg\]](https://support.enplus.uk/hubfs/enplus%20grey%20logo-1.svg) Open main navigation Close main navigation - English Show submenu for translations - [Contact us](https://support.enplus.uk/migration/knowledge/kb-tickets/new) - [Customer portal](https://support.enplus.uk/tickets-view) - [Go back to Website](https://enplus.uk/) [Go back to Website](https://enplus.uk/) How can we help you? - There are no suggestions because the search field is empty. 1. [Support](https://support.enplus.uk/migration/knowledge?hsLang=en) 2. [For Installers](https://support.enplus.uk/migration/knowledge/for-installers?hsLang=en) 3. [7kW Smart Home Charge Point](https://support.enplus.uk/migration/knowledge/for-installers?hsLang=en#7kw-smart-home-charge-point) # Quick Installation Guide ## How to install 7kW Smart Home Series Charge Point ![Enplus Quick Installation Guide home smart series cover](https://support.enplus.uk/hs-fs/hubfs/Enplus%20Quick%20Installation%20Guide%20home%20smart%20series%20cover.jpg?width=644&name=Enplus%20Quick%20Installation%20Guide%20home%20smart%20series%20cover.jpg)**TABLE OF CONTENTS** 1. [BEFORE YOU START](https://support.enplus.uk/migration/knowledge/quick-installation-guide#start) 2. [VISUAL OVERVIEW](https://support.enplus.uk/migration/knowledge/quick-installation-guide#overview) 3. [HARDWARE INSTALLATION REFERENCE](https://support.enplus.uk/migration/knowledge/quick-installation-guide#installation) 4. [NETWORK SETUP](https://support.enplus.uk/migration/knowledge/quick-installation-guide#network) 5. [MONTA INTEGRATION](https://support.enplus.uk/migration/knowledge/quick-installation-guide#monta) --- ### 1. BEFORE YOU START #### Charge Point Installation Requirement 1. This product shall only be installed, repaired, or serviced by a qualified and authorised electrician. All applicable local, regional, and national regulations for electrical installations must be respected. 2. Please check the Wi-Fi router frequency band and network strength at the point of installation. - This charge point only supports a 2.4GHz network. - Wi-Fi signal strength between -50dBm to -60dBm is considered good. - A 2.4GHz Wi-Fi extender may be needed if the signal strength is lower than -60dBm. - The Wi-Fi signal strength can be checked with a smartphone at the point of installation using a suitable WiFi Speed Test mobile app. 3. This charge point is equipped with 6mA DC RCD protection and PEN fault detection features. An appropriate residual current protection(Type A or Type F) and overload protection or equivalent must be fitted on the electrical supply end of this charge point. 4. For installation planning, please check the Mounting Template and EN+ User Manual included as a reference for the installation. ### 2. VISUAL OVERVIEW   ![Enplus Quick Installation Guide visual overview](https://support.enplus.uk/hs-fs/hubfs/Enplus%20Quick%20Installation%20Guide%20visual%20overview.jpg?width=577&name=Enplus%20Quick%20Installation%20Guide%20visual%20overview.jpg)   ### 3. HARDWARE INSTALLATION REFERENCE Inside this box, you will find... ![install guide hardware ref](https://support.enplus.uk/hs-fs/hubfs/install%20guide%20hardware%20ref.jpg?width=688&name=install%20guide%20hardware%20ref.jpg) You will also find the following manuals... | User Manual ![user manual](https://support.enplus.uk/hs-fs/hubfs/user%20manual.jpg?width=305&name=user%20manual.jpg) | Mounting Template ![mounting template](https://support.enplus.uk/hs-fs/hubfs/mounting%20template.jpg?width=181&name=mounting%20template.jpg) | Monta Integration Guide ![monta guide](https://support.enplus.uk/hs-fs/hubfs/monta%20guide.jpg?width=305&name=monta%20guide.jpg) | | --- | --- | --- | ### 4. NETWORK SETUP Follow the steps below to configure the network: | ### **Step 1: Aeroplane Mode** - Switch your smartphone to aeroplane mode | ![](https://support.enplus.uk/hubfs/image-png-Jun-26-2022-04-41-27-60-PM.png) | | --- | --- | | ### **Step 2: Power Reboot** - Restart the power of EN+ Charge Point and ensure the indicator light is flashing green Please note that the network configuration setting is only accessible 15 minutes after power reboot | ![Enplus Quick Installation Guide network step 1](https://support.enplus.uk/hs-fs/hubfs/Enplus%20Quick%20Installation%20Guide%20network%20step%201.jpg?width=58&name=Enplus%20Quick%20Installation%20Guide%20network%20step%201.jpg) | | ### **Step 3: Charge Point Wi-Fi** - Activate Wi-Fi on your smartphone - Wait for a minute, and select the charge point hotspot beginning with the characters SN100. | ![](https://support.enplus.uk/hs-fs/hubfs/image-png-Jun-26-2022-05-05-49-85-PM.png?width=177&name=image-png-Jun-26-2022-05-05-49-85-PM.png) | | ### **Step 4: Input Password** - Input "admin123" as the password - Select "Connect" | ![](https://support.enplus.uk/hs-fs/hubfs/undefined-1.png?width=190&name=undefined-1.png) | | ### **Step 5: Automatic Network Switch** - **Reject** switching to a different Wi-Fi network when the prompt is displayed. - The smartphone will communicate with the charge point without an internet connection | ![](https://support.enplus.uk/hs-fs/hubfs/undefined-2.png?width=190&name=undefined-2.png) | | ### **Step 6: Open Network Configuration Webpage** - Open a web browser on the smartphone - Go to 192.168.4.1 to open the network configuration page - Input the 4-digit network pin. The network pin can be found on the cover of the charge point. Please take note of the pin and **remove the pin sticker from the charge point** - Tap Login - If the webpage is not accessible, please reboot the charge point power | ![](https://support.enplus.uk/hs-fs/hubfs/undefined-3.png?width=190&name=undefined-3.png) | | ### **Step 7:  Open Charge Point Setup** - Open the Charge Point Setup menu to configure the Wi-Fi | ![](https://support.enplus.uk/hs-fs/hubfs/undefined-4.png?width=190&name=undefined-4.png) | | ### **Step 8: Wi-Fi Setup** - Tap on the Wi-Fi dropdown menu icon and select the nearby Wi-Fi - Input the Wi-Fi password - Click Confirm - A confirmation message will appear and the charge point will restart its network | ![](https://support.enplus.uk/hs-fs/hubfs/image-png-Jun-26-2022-05-31-25-21-PM.png?width=164&name=image-png-Jun-26-2022-05-31-25-21-PM.png) | | ### **Step 9:  Verifying Network Connectivity** - To verify the network, repeat steps 3 - 6. If it is not accessible, reset the power. - Check that the Wi-Fi strength indicates either "Good" or "Excellent". - If the Wi-Fi strength is poor, change to a stronger network or install a Wi-Fi extender - Ensure that "Server Communication" indicates "Connected" and that "Network Status" indicates "Online" | ![](https://support.enplus.uk/hs-fs/hubfs/undefined-Jun-26-2022-05-33-51-88-PM.png?width=210&name=undefined-Jun-26-2022-05-33-51-88-PM.png) | | You are now ready for Monta integration! Complete your last steps via the Monta Integration Guide included inside this product packaging to integrate the EN+ Charge Point with the Monta Mobile App. | ![](https://support.enplus.uk/hs-fs/hubfs/image-png-Jun-26-2022-05-50-43-01-PM.png?width=197&name=image-png-Jun-26-2022-05-50-43-01-PM.png) |   - [For Installers](https://support.enplus.uk/migration/knowledge/for-installers?hsLang=en#main-content) - [7kW Smart Home Charge Point](https://support.enplus.uk/migration/knowledge/for-installers?hsLang=en#7kw-smart-home-charge-point) - [FAQ](https://support.enplus.uk/migration/knowledge/for-installers?hsLang=en#faq) - [For Users](https://support.enplus.uk/migration/knowledge/for-users?hsLang=en#main-content) - [7kW Smart Home Charger](https://support.enplus.uk/migration/knowledge/for-users?hsLang=en#7kw-smart-home-charger) - [FAQs](https://support.enplus.uk/migration/knowledge/faqs?hsLang=en#main-content) - [OZEV](https://support.enplus.uk/migration/knowledge/faqs?hsLang=en#ozev) - [Technical Features](https://support.enplus.uk/migration/knowledge/faqs?hsLang=en#technical-features) [![Chill listening crop-3](https://support.enplus.uk/hubfs/enplus%20grey%20logo-1.svg "Chill listening crop-3")](https://enplus.uk/) © EN+ EV Chargers UK 2022 | All Rights Reserved Copyright © 2026, EN+ EV Charging